02-13-2007 03:10 PM - edited 03-05-2019 02:20 PM
Hi,
I am generating traffic with a few different DSCP values (Voice, Signaling, other)
When I SPAN the ports of devices in the path I can see the correct DSCP values at each point.
When I RSPAN the same devices & interfaces the DSCP values are all set to 0.
What do I have to do to make sure RSPAN passes the same DSCP value as SPAN would?
Regards, MH
Solved! Go to Solution.
02-19-2007 01:49 PM
The rewrite only occurs during an RSPAN session where there is an untrusted port.Trusting dscp on the ingress interface and having the client set dscp. In this condition, the dscp value will not be rewritten through the rspan session
02-19-2007 01:49 PM
The rewrite only occurs during an RSPAN session where there is an untrusted port.Trusting dscp on the ingress interface and having the client set dscp. In this condition, the dscp value will not be rewritten through the rspan session
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide