CiscoWorks 2.5

Unanswered Question
Feb 13th, 2007

I've a variety of cisco switches (3524,3550,3560,3570, 6509) in our network, but I kept getting "partially success" in RME/Config Management/Archive Management. The error messaage is "Failed to fetch config using RCP.Connection refused: connect Verify RCP is enabled or not" when it comes to VLAN. It made no difference if I enabled RCP on the switches or not. I do not have the same problem with routers though..

Has anybody ever been able to get the switch config archived via CiscoWorks 2.5 successfully?

Any suggestion is greatly appreciated.

TIA,

hieu

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
David Stanford Fri, 02/16/2007 - 06:20

In order to archive the vlan.dat file you will need to make sure telnet or shh is enabled.

Also, have a look at the RME device attributes and see if any field is marked as "Default Not Defined". If so, correct this field and try again.

Hieu Cao Mon, 02/19/2007 - 10:09

Thanks for your response.

I am very certain that neither telnet or ssh is disabled in our switches.

I'll try your suggestion and post back..

Thanks again.

hieu

Actions

This Discussion