02-14-2007 11:52 AM - edited 03-11-2019 02:33 AM
When setting up the Stateful failover link, are there any issues if you use the management interface or should you only use an ethernet interface?
02-14-2007 12:00 PM
You can use the management interface for stateful failover. However, if you are using gigabit data interfaces, its recommended that stateful link also be a gigabit interface.
02-14-2007 12:30 PM
Ok thanks.
Then next question will be that I'm having some issues trying to enable the failover. I have gone through the configurations and made sure have that everything is correct. I've checked to make sure that they are both on same version, mode.
After I enter command for failover, nothing happens...are there any suggestions that could give that I might be overlooking?
02-14-2007 12:34 PM
You need to enter failover command on both Primary and Secondary box to get failover working. Please refer to flollowing link also to make sure that configuration has been done as defined here:
02-15-2007 07:58 AM
Sorry should have been more clear on that part. I have done the failover command on the primary first and the secondary afterward with no luck.
Also just saw this and not sure if might be an issue but when do sh ver on both, the primary hardware is ASA5520 and secondary is ASA5520-k8. Will this be an issue?
02-15-2007 10:09 AM
What version are you running? Were you trying to configure failover from ASDM wizard? If yes, it wont recognize them as same hardware due to a bug, you need to configure failover from CLI. If you did configure it from CLI, there shouldnt be any issue. Can you provide the configuration from the Primary firewall?
02-15-2007 12:08 PM
I believe I just found what might be causing the issue. The primary ASA has different WebVPN license than the secondary ASA.
02-15-2007 01:35 PM
ok .. if that is the case, failover will not work as it needs same license on both devices.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide