Call Forward

Answered Question
Feb 15th, 2007

Hi,

I have 7940 with two lines:

from my phone if i click CFwall it only forward calls coming to my primary line, is it possible to do it from the phone for the other line.

Good day

I have this problem too.
0 votes
Correct Answer by rob.huffman about 9 years 7 months ago

Hi Wissam,

This is a very common question all of us have asked at one point or another and currently cfwdall is only supported for Line 1 on the phone.The only method available to cfwdall Line 2 etc. is to do it from ccmadmin or the ccmuser web access page.

There is also a third party product called;

IPPhone callForwarder

This new version brings to the user the ability of defining and setting the call forwards from the IP Phone. When selecting the IP Phone callForwarder service, a menu with all available lines will appear. After selecting the line the user wishes to set the forward on, a new menu containing the forward definitions will show on screen. Only those forwarding parameters definied by the Administrator will be displayed. These parameters will show the actual forward destination. The user can then set any of these callForwards.

From this link at myvoipsource.org;

http://www.voip-tools.org/index.php?option=com_content&task=view&id=47&Itemid=85

Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
rob.huffman Thu, 02/15/2007 - 07:56

Hi Wissam,

This is a very common question all of us have asked at one point or another and currently cfwdall is only supported for Line 1 on the phone.The only method available to cfwdall Line 2 etc. is to do it from ccmadmin or the ccmuser web access page.

There is also a third party product called;

IPPhone callForwarder

This new version brings to the user the ability of defining and setting the call forwards from the IP Phone. When selecting the IP Phone callForwarder service, a menu with all available lines will appear. After selecting the line the user wishes to set the forward on, a new menu containing the forward definitions will show on screen. Only those forwarding parameters definied by the Administrator will be displayed. These parameters will show the actual forward destination. The user can then set any of these callForwards.

From this link at myvoipsource.org;

http://www.voip-tools.org/index.php?option=com_content&task=view&id=47&Itemid=85

Hope this helps!

Rob

twissam Thu, 02/15/2007 - 12:29

hehe

it is funny, in the link you used voip-tools, but the right one is the one you wrote myvoicesource.org

Good day

nicolas Fri, 02/16/2007 - 08:36

Hi,

Other solution in using CCMUser page

http://x.x.x.x/ccmuser

From the ccmuser page it's possible to do a CallFwd to the second line ;-)

Thanks

Regards,

--

Christophe

Actions

This Discussion