02-16-2007 06:42 AM - edited 02-21-2020 02:52 PM
Hello.
I want to deploy easy vpn server on 10 cisco 877 and 876 routers and access them from a remote location (company HQ).When i leave the router firewall off the vpn server works.When i turn it on it doesn't.
Although i allow all traffic from my ip eg 80.76.61.158 i cannot access the vpn server.
I tried from a location to leave the firewall off and it worked fine.
I use SDM to configure the vpn server.Any ideas what i can do with the firewall cause i really cannot leave it "open".
Thanks in advance.
Solved! Go to Solution.
02-16-2007 03:03 PM
It would be a good idea to paste the configuration of the VPN server with firewall on.
Regards,
Kamal
02-16-2007 12:47 PM
Hi,
Can you post the rules you have in the inbound ACL applied to outside interface ?
-Kanishka
02-16-2007 03:03 PM
It would be a good idea to paste the configuration of the VPN server with firewall on.
Regards,
Kamal
02-21-2007 05:46 AM
I havent got the configuration i shut down the firewall and i cannot do anything now. Any guidelines to follow?A working example possibly??
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide