cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
666
Views
0
Helpful
1
Replies

Max noise threshold for VoWLAN deployment

joeri.de.winter
Level 1
Level 1

can anybody tell me what the max noise threshold is for a VoWLAN deployment

thx

1 Accepted Solution

Accepted Solutions

csannedhi
Level 1
Level 1

For Vocera deployment the badge should have at least -65 dBm RSSI and SNR should be above 25. Refer to Vocera deplyment in Cisco Unified Wireless Network Infrastructure document at http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080766d54.shtml#c5

More information at http://www.vocera.com/downloads/InfrastructureGuide.pdf

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806d11cb.shtml

Basically you have to ask your VoIP wireless phone vendor for signal related requirements.

View solution in original post

1 Reply 1

csannedhi
Level 1
Level 1

For Vocera deployment the badge should have at least -65 dBm RSSI and SNR should be above 25. Refer to Vocera deplyment in Cisco Unified Wireless Network Infrastructure document at http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080766d54.shtml#c5

More information at http://www.vocera.com/downloads/InfrastructureGuide.pdf

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806d11cb.shtml

Basically you have to ask your VoIP wireless phone vendor for signal related requirements.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: