cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
324
Views
5
Helpful
3
Replies

site-to-site VPN & Client on the same Router

abuatiya
Level 1
Level 1

hello,

i'm running site-to-site VPN and VPN Client on the same router 3845.

The remote site of site-to-site has dynamic IP address through the ISP provider, I configure the VPN tunnel and the client config .

The site-to-site could establish the communication untill i remove the below line from the router config and put it back.

( crypto map to_dubai_map client authentication list sdm_vpn_xauth_ml_2)

The connection will remain up for some time then dropped again.

Or:

when i add no-xauth to peer as the below

crypto isakmp key XXXXXXX address 0.0.0.0 0.0.0.0 no-xauth

but when i add no-xauth the remote VPN client could not login or establish the connection.

Im attaching the config . Your help will be appreciated

3 Replies 3

abuatiya
Level 1
Level 1

Hello ,

ANY UPDATE !!! ???????

Hi,

You have to configure isakmp profiles in this scenario. Here's the doc :

http://cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801dddbb.shtml

HTH,

-Kanishka

Kanishka,

I had the same problem as the initial post and this fixed it for me!

thanks