831 Router - Mulitple Static IP's to DMZ

Unanswered Question
Feb 18th, 2007

I have an 831 router that I would like to install in between our ISP and our network. Our ISP is providing multiple static IP's, which currently go to different servers, each with separate functionality, including 2 WWW servers with different content.

Can I user the 831 asa firewall device and a DMZ, point the different static IP's to different computers in the DMZ?

And if so, can someone point to some specific documentation or commands to perform the task?

Thanks,

Mark.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Sun, 02/18/2007 - 13:57

Hi Mark

Yes you should be able to do this. You can create a DMZ on this router with one of the LAN ports. With the NAT your statements would look like

ip nat inside source static "local ip" "global ip"

Attached are links to 2 docs:

1) Setting up a DMZ on an 831

http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a0080235e23.html

2) A document on configuring NAT and examples.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_white_paper09186a0080091cb9.shtml

HTH

Jon

Actions

This Discussion