Novice - How can I tell if we are using IPSec on VPN?

Unanswered Question
Feb 19th, 2007

I'm a novice user, how can I tell if we are using PPTP/L2TP and IPSec?

I wonder if you know of a link, which simply explains the Stages of a VPN tunnel, phase 1 phase 2 etc? A lot of the googel searches go very deep for a novice user.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
shyamatopsource Mon, 02/19/2007 - 00:33

When you are using commands like

fw1(config)# isakmp policy 10 encryption des

fw1(config)# isakmp policy 10 hash sha

fw1(config)# isakmp policy 10 authentication pre-share

fw1(config)# isakmp policy 10 group 1

fw1(config)# isakmp policy 10 lifetime 86400

for phase 1 vpn to define policies

you will know that we are usin ipsec

Thanks

shyam

whiteford Mon, 02/19/2007 - 00:51

I use a Cisco Concentrator 3015, don't really use commands. The VPN connects to Cisco 837's for Lan-2-Lan's. On the router I see this sort of config:

crypto isakmp policy 1

encr 3des

hash md5

authentication pre-share

group 2

crypto isakmp key password address 1.2.3.4

!

!

crypto ipsec transform-set vo_t_set esp-3des esp-md5-hmac

!

crypto map vo_t_set 10 ipsec-isakmp

set peer 1.2.3.4

set transform-set vo_t_set

match address 101

Actions

This Discussion