02-19-2007 06:45 AM - edited 03-11-2019 02:35 AM
I have a PIX 515 win 6.3(3).Know I want to update it which version will be suitable and how to update plz kindly suggest me with a link from where I can see how to update
02-19-2007 10:11 AM
Hi,
The most stable code in 6.x series is 6.3(5). So, you can upgrade to that. To get the upgrade instructions :
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a5d.shtml
*Please rate if this helped !
-Kanishka
02-19-2007 10:12 AM
Upgrading to a later version depends on many things... First, do you want to go to 7.X or stay with 6.3(x). The 7.X versions have new features which are not available to 6.x; however, the 6.3(5)( the newest) is General Deployment (no 7.X version is GD). Additionally, 7.X has memory requirements that must be met to permit the upgrade. I am managing >50 ASAs/PIXs running 7.2(2), and haven't had any major issues. I would strongly suggest going to this version, but you must check your memory first because it requires 64MB for restricted licenses and 128MB for unrestricted and failover licenses. To get to this version, you must first upgrade to 7.0 then you can go to 7.1 then 7.2. Be sure to use the newest version of ASDM if you want also (ASDM replaces PDM).
Here is a link to the PIX software..
http://www.cisco.com/cgi-bin/tablebuild.pl/pix
Here is a link to upgrade documentation..
http://www.cisco.com/en/US/products/sw/secursw/ps2120/prod_release_note09186a0080688c71.html (see section about Upgrading to a New Software Version)
Please rate if this helps!
Thanks.
Jay
02-19-2007 10:17 AM
Here is a link to upgrade from 6.3X to 7.0... The previous info is for once you get to 7.0.
Don't forget to rate ;)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: