Question about EZVPN

Unanswered Question
Feb 19th, 2007

Hi,

I have a C870 running 12.4(4)T2. I am using EZVPN on this router. My question is what does "Phase: 6" mean? Thanks

#sho crypto ipsec client ezvpn

Easy VPN Remote Phase: 6

Tunnel name : primary

Inside interface list: Vlan1

Outside interface: FastEthernet4

Current State: IPSEC_ACTIVE

Last Event: CONN_DOWN

DNS Primary: x.x.x.x

DNS Secondary: x.x.x.x

NBMS/WINS Primary: x.x.x.x

NBMS/WINS Secondary: x.x.x.x

Default Domain: customer.com

Save Password: Disallowed

Current EzVPN Peer: x.x.x.x

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Hi,

Before the EzVPN Tunnels Are Up ===>

Router# show crypto ipsec client ezvpn

Easy VPN Remote Phase: 6

In this document you will find what all the phases means:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_7/ftezvpnr.htm

#########################################

#If you find this post usefull

#please don't forget to rate this

#########################################

#Iwan Hoogendoorn

#CCIE#13084

#########################################

Actions

This Discussion