EZVPN question

mnewnam06 · ‎02-20-2007

Hi,

I have a C870 running 12.4(4)T2. I am using EZVPN on this router. My question is what does "Phase: 6" mean? Thanks

#sho crypto ipsec client ezvpn

Easy VPN Remote Phase: 6

Tunnel name : primary

Inside interface list: Vlan1

Outside interface: FastEthernet4

Current State: IPSEC_ACTIVE

Last Event: CONN_DOWN

DNS Primary: x.x.x.x

DNS Secondary: x.x.x.x

NBMS/WINS Primary: x.x.x.x

NBMS/WINS Secondary: x.x.x.x

Default Domain: customer.com

Save Password: Disallowed

Current EzVPN Peer: x.x.x.x

Kamal Malhotra · ‎02-20-2007

Hi,

The development in this technology has been in phases. Please check the following URLs.

HTH,

Please rate if it helps.

Regards,

Kamal

mnewnam06 · ‎02-21-2007

Hi Kamal,

Thanks for the reply. I have found that you are essentially correct. This phase number refers to the ezvpn client feature set running on the router.

Kamal Malhotra · ‎02-21-2007

Hi,

You are most welcome :-)

Glad to know that I could provice you with the required information.

Please rate if it helpd.

Regards,

Kamal