Solved: PIX/ASA Sub-Second Failover

xephael · ‎02-20-2007

The release notes for 7.2.1 software mention sub-second failover:

Are they just talking about the 500/ 800msec failover polling times?

vitripat · ‎02-20-2007

Yes .. please refer to following link:

http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008063b31a.html#wp1149446

A failure can be detected within 800 milliseconds if Active unit looses power or withing 500 milliseconds if Active units main board interface link goes down.

View solution in original post

vitripat · ‎02-20-2007

Yes .. please refer to following link:

http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008063b31a.html#wp1149446

A failure can be detected within 800 milliseconds if Active unit looses power or withing 500 milliseconds if Active units main board interface link goes down.