1800 router need to access web server behind this router.

Unanswered Question
Feb 20th, 2007

This is my config file. I am trying to access a web server on the internal network. Could some one please point out what i am doig wrong?

no ip http server

no ip http secure-server

ip nat inside source list 15 interface FastEthernet0/1 overload

ip nat inside source static tcp 80 interface FastEthernet0/1 80

ip access-list extended external2

remark permit http

permit tcp any eq www host eq www

remark permint dhcp

permit udp any any eq bootpc log

remark The below set the rfc1918 private exclusions

deny ip any log

deny ip any log

deny ip any log

remark Permit Established connections

permit tcp any any established

remark Permit Internal DNS Out

permit udp any eq domain any

remark Deny and log anything that doesn't comply to these rules

permit udp any any

deny ip any any log




access-list 15 permit

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
spremkumar Tue, 02/20/2007 - 21:19


Can you remove the second NAT statement and replace it with the below mentioned command ?

ip nat inside source static tcp 80 x.x.x.x 80

x.x.x.x -- ur public ip address configured on the fastethernet interface..



This Discussion