02-21-2007 11:15 AM - edited 07-03-2021 01:40 PM
Hi
We've tested MS Vista native supplicant on a SSID configure for WPA1 + WPA2 on ours WiSM. It wont work.
We've repeated the same test using a SSID configure for WPA1 and it works
First question : Why ?
Second question : What the difference between <wpa1 + wpa2> mode and WPA2 with wpa compatibility option enable. Did anyone do tests with that configuration.
02-27-2007 09:57 AM
Dominic,
I haven't been able to configure the WLCs with the strict "WPA2" (only) setting. Did you have this problem as well? Running 4.0.179.11 and WCS 4.0.78.
03-27-2007 03:32 PM
Guys,
I've been able to configure for WPA2 only under the WPA1+WP2 L2 security model, just select only the WPA2 options. I can get this to work using LEAP as the authentication method with Intel PROSet under XP. Dominic what authentication are you using - PEAP or EAP-TLS?
08-14-2007 03:10 AM
Hi,
I have the same problem. But i can only select WPA or WPA2 in the WPA1+WPA2 section. Only WPA or WPA2 is not available in the layer 2 security. You have any solution at the moment or which version of the WISM you have?
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide