OSPF problem

tmesbah · ‎02-21-2007

Hi,

I am having problem with OSPF when I configured 1 to many VPN l2l tunnel "spoke to Hubs". I am getting an error when I wanted to add another neither in the OSPF statement " ERROR: Only one neighbor allowed on point-to-point interfaces".

Nortel Contivity work fine, I think they let pass the multicat in clear through the tunnel. We are testing the ASA to replace them but I have to fix this big issue. I don't want to use static route.

I found a document in Cisco site but no mentionon of OSPF on it:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml

Any idea or advice.

Thanks

Note:

I had no issue with OSPF when I configured 1 to 1 l2l tunnel using this document:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804acfea.shtml

amritpatek · ‎02-27-2007

This is a restriction on ASA 7.x, When an interface is configured as point-to-point, non-broadcast, You can define only one neighbor for the interface. Currently, only one neighbor is possible on an interface. In order to support multiple neighbors, point-to-multipoint support should be added.

nickbettison · ‎10-09-2008

>In order to support multiple neighbors, point-to-multipoint support should be added.

Does anyone know if there is a bug/feature request for this, I see it's still not available in 8.0.4 :(