02-21-2007 11:46 PM - edited 03-03-2019 03:52 PM
Following is config & debug info.
My target is sftp to server 192.168.10.25 from 155.107.90.48 network. Please help. Its urgent.
interface FastEthernet0/0
ip address 10.156.67.3 255.255.255.224
Connected to CDSL network
ip accounting output-packets
ip nat inside
speed 100
full-duplex
!
interface FastEthernet0/1
ip address 155.107.90.59 255.255.255.240
Connected to DMZ
ip nat outside
speed 100
full-duplex
!
ip nat inside source static 192.168.10.25 155.107.90.56
ip nat outside source static 155.107.90.62 10.156.67.4
ip classless
ip route 10.156.0.0 255.255.0.0 10.156.67.1
ip route 155.107.90.0 255.255.255.0 155.107.90.62
ip route 192.168.10.0 255.255.255.0 10.156.67.1
show ip nat translations
Pro Inside global Inside local Outside local Outside global
--- 155.107.90.56 192.168.10.25 10.156.67.4 155.107.90.62
--- 155.107.90.56 192.168.10.25 --- ---
--- --- --- 10.156.67.4 155.107.90.62
Debug out put of IP translations:
00:02:21: NAT*: s=155.107.90.62->10.156.67.4, d=155.107.90.56 [25711]
00:02:21: NAT*: s=10.156.67.4, d=155.107.90.56->192.168.10.25 [25711]
00:02:26: NAT*: s=155.107.90.62->10.156.67.4, d=155.107.90.56 [25757]
00:02:26: NAT*: s=10.156.67.4, d=155.107.90.56->192.168.10.25 [25757]
00:02:31: NAT*: s=155.107.90.62->10.156.67.4, d=155.107.90.56 [25764]
00:02:31: NAT*: s=10.156.67.4, d=155.107.90.56->192.168.10.25 [25764]
00:02:36: NAT*: s=155.107.90.62->10.156.67.4, d=155.107.90.56 [25771]
00:02:36: NAT*: s=10.156.67.4, d=155.107.90.56->192.168.10.25 [25771]
00:02:39: NAT: s=155.107.90.62->10.156.67.4, d=155.107.90.56 [20246]
00:02:39: NAT: s=10.156.67.4, d=155.107.90.56->192.168.10.25 [20246]
00:02:41: NAT*: s=155.107.90.62->10.156.67.4, d=155.107.90.56 [25779]
00:02:41: NAT*: s=10.156.67.4, d=155.107.90.56->192.168.10.25 [25779]
00:02:42: NAT: s=155.107.90.62->10.156.67.4, d=155.107.90.56 [20247]
00:02:42: NAT: s=10.156.67.4, d=155.107.90.56->192.168.10.25 [20247]
00:02:46: NAT*: s=155.107.90.62->10.156.67.4, d=155.107.90.56 [25787]
00:02:46: NAT*: s=10.156.67.4, d=155.107.90.56->192.168.10.25 [25787]
00:02:48: NAT: s=155.107.90.62->10.156.67.4, d=155.107.90.56 [20264]
00:02:48: NAT: s=10.156.67.4, d=155.107.90.56->192.168.10.25 [20264]
02-21-2007 11:54 PM
What are you trying to do nating source based or destination based flow? Explain your traffic flow please.
Cheers
Hoogen
02-22-2007 12:01 AM
My network(DMZ) is 155.107.90.48/240 & flow is
155.107.90.48<-->10.156.67.0<-->10.156.65.17----WAN Connectivity-----10.156.65.18<-------------->192.168.10.25(Other END)
We are using two way nating because our LAN use both 10.--- network & 192.168.--- network
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide