HTTP On Private IP

Unanswered Question
Feb 22nd, 2007

Hello All,

I have my web server running on private ip ( i have only one public ip what we use for internet access in office. Now we need to use same for web server.

Domain registration, and Managed DNS service has been leased from third party vendor. We only need to host the website locally.

As gateway we are using Cisco 2621, here i configured the NAT Translation with overload function for internet access as well translation with extended command for port number 80,

here is the config.

ip nat inside source static tcp 80 xx.xx.xx.xx 80 extendable

Is any thing else is required to make we server accessible from out side.?

I have tested to ping from our side and i am getting the responce if i ping

Any body has idea reply,



I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Danilo Dy Thu, 02/22/2007 - 07:00

You mean the HTTP or the FTP? For your FTP you need to need passive FTP for PAT.

ip nat inside source static tcp 20 xx.xx.xx.xx 20 extendable

ip nat inside source static tcp 21 xx.xx.xx.xx 21 extendable

can you post the output of "sh ip nat trans" ?


This Discussion