02-22-2007 05:01 AM - edited 03-03-2019 03:52 PM
Hello All,
I have my web server running on private ip (192.168.1.1). i have only one public ip what we use for internet access in office. Now we need to use same for web server.
Domain registration, and Managed DNS service has been leased from third party vendor. We only need to host the website locally.
As gateway we are using Cisco 2621, here i configured the NAT Translation with overload function for internet access as well translation with extended command for port number 80,
here is the config.
ip nat inside source static tcp 192.168.1.1 80 xx.xx.xx.xx 80 extendable
Is any thing else is required to make we server accessible from out side.?
I have tested to ping from our side and i am getting the responce if i ping www.mydomain.com
Any body has idea reply,
Thanks
Dhaval
02-22-2007 05:06 AM
02-22-2007 06:53 AM
02-22-2007 07:00 AM
You mean the HTTP or the FTP? For your FTP you need to need passive FTP for PAT.
ip nat inside source static tcp 192.168.1.1 20 xx.xx.xx.xx 20 extendable
ip nat inside source static tcp 192.168.1.1 21 xx.xx.xx.xx 21 extendable
can you post the output of "sh ip nat trans" ?
02-22-2007 08:42 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide