Min Required Flash Memory & DRAM

admin_2 · ‎02-23-2007

I have Cisco 2821. With IOS version:c2800nm-ipbase-mz.123-8.T8.bin

Cisco 2821 (revision 53.51) with 253952K/8192K bytes of memory.

DRAM configuration is 64 bits wide with parity enabled.

239K bytes of non-volatile configuration memory.

62720K bytes of ATA CompactFlash (Read/Write)

can anybody tell me can i upgrade latest IOS 12.4 on my router? or I need additional flash memory & DRAM hardware before for this ios upgrade.??

Please advise.

ahmednaas · ‎02-23-2007

You can use the feature navigator to determine mem/flash requirements for your desired image:

but I think 64 MB Flash and 256 MB RAM should be enough for the latest 12.4 releases.

hoogen_82 · ‎02-23-2007

You can go ahead with this image c2800nm-ipbase-mz.124-11.T1.bin which requires 64mb flash and 256 mb dram.

HTH

Hoogen

Do rate if this helps :)

Report Inappropriate Content · ‎02-25-2007

Thx Hoogen! But i think this link for download IOS. I have no access to download software :( Thxxxxx for your help....!

purohit_810 · ‎02-23-2007

You can get an information from about IOS Feature, Memory requirement as well as You can compare your old IOS and NEw IOS on

Regards,

Dharmesh Purohit

bvsnarayana03 · ‎02-25-2007

Why dont you prefer GD IOS, unless you requires specific features from ur IOS.