ssh in routers and switches

dragec · ‎02-23-2007

wich ios must I have in order to establish ssh on routers and switches?

thanks!

rajivrajan1 · ‎02-23-2007

SSH Version 1.0 (SSH v1) server was introduced in some IOS platforms and images starting in Cisco IOS Software Release 12.0.5.S.

SSH client was introduced in some IOS platforms and images starting in Cisco IOS Software Release 12.1.3.T.

SSH terminal-line access (also known as reverse-Telnet) was introduced in some IOS platforms and images starting in Cisco IOS Software Release 12.2.2.T.

SSH Version 2.0 (SSH v2) support was introduced in some IOS platforms and images starting in Cisco IOS Software Release 12.1(19)E.

http://www.cisco.com/warp/public/707/ssh.shtml

hoogen_82 · ‎02-23-2007

When you are looking at the images look for a k9 this is keyword for any ios supporting ssh on router or switch.

HTH

Hoogen

Do rate if this soln helps :)

Richard Burts · ‎02-23-2007

In addition to the consideration of which versions introduced support for which implementations of SSH, be aware that there is also a feature set dependency. SSH depends on encryption and the code that you run must support cryptography. Some feature sets do support this (Advanced Security, Advanced Enterprise Services, IP IPSec 3DES) and some do not (IP BASE).

HTH

Rick

HTH

Rick

bvsnarayana03 · ‎02-23-2007

for SSH, IOS must support crypto. Look for k series in IOS file.

Use SSH v2 as far as possible.