Need assistance in creating a logical interface in PIX 7.2

Unanswered Question
Feb 23rd, 2007


I've recently upgraded my pix 525 from 6.3 to 7.2. Now I need to take a spare interface (ethernet4) enable this interface and create sub interfaces to use to communicate to my inside network by mapping to inside vlans.

In 6.3, I would do the following (example)

niterface ethernet4 vlan240 logical

nameif vlan240 PROD security 25

ip address PROD

Now that the 7.2 command set is really different and I do not have a test PIX to test with, I'm hoping that someone would have an example for me.

Goal: My remote location (VPN/GRE) needs to communicate to my local networlk. But, I am not advertising this subnet in ospf. I want to map an advertised IP to this inside non-advertised IP. Setting up a logical interface is how I can achieve this.

Please advise with samples.



I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
jgervia_2 Mon, 02/26/2007 - 04:43

nameif ethernet4.1

vlan 40

nameif ethernet 4.2

vlan 50

etc. etc.

You'll still need all the other nameif/ip comands.



This Discussion