02-23-2007 01:03 PM - edited 03-05-2019 02:33 PM
what is the difference between a 'dynamic' and 'static' MAC address when using "show mac-address-table".
02-23-2007 01:18 PM
Basically, Dynamic addresses are MAC addresses learnt by the switch during its operation.
Static addresses are MAC addresses entered by the operator and associated with certain interfaces for security reasons.
Here is some more info:
02-23-2007 01:27 PM
thanks. What I am looking for is an explanation of why these multicast addresses show up from a "show mac-address" but no dynamic address appears.
Static Address Table:
Destination Address VLAN Input Port Output Ports
------------------- ---- ---------- -----------------------
0100.5e00.0118 40 Fa0/33 Gi0/1
0100.5e00.013c 40 Fa0/33 Fa0/8 Fa0/41 Gi0/1
0100.5e00.017f 40 Fa0/33 Fa0/11 Fa0/24 Fa0/23 Gi0/1
0100.5e01.0026 40 Fa0/33 Gi0/1
0100.5e7f.fffa 40 Fa0/33 Fa0/11 Fa0/24 Fa0/23 Fa0/39
Fa0/41 Gi0/1
0100.5e7f.fffd 40 Fa0/33 Fa0/11 Fa0/24 Fa0/23 Gi0/1
0100.5e7f.fffe 40 Fa0/33 Gi0/1
Non-static Address Table:
Destination Address Address Type VLAN Destination Port
------------------- ------------ ---- --------------------
0030.4880.d3d8 Dynamic 40 FastEthernet0/45
Static Address Table:
Destination Address VLAN Input Port Output Ports
------------------- ---- ---------- -----------------------
0100.5e00.0118 40 Fa0/45 Gi0/1
0100.5e00.013c 40 Fa0/45 Fa0/8 Fa0/41 Gi0/1
0100.5e00.017f 40 Fa0/45 Fa0/11 Fa0/24 Fa0/23 Gi0/1
0100.5e01.0026 40 Fa0/45 Gi0/1
0100.5e7f.fffa 40 Fa0/45 Fa0/11 Fa0/24 Fa0/23 Fa0/39
Fa0/41 Gi0/1
0100.5e7f.fffd 40 Fa0/45 Fa0/11 Fa0/24 Fa0/23 Gi0/1
0100.5e7f.fffe 40 Fa0/45 Gi0/1
02-23-2007 01:47 PM
What model switch?
Are you running any multicast services on your network?
What is your environment? is this an access/distribution/core switch? what is connected to it?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: