8-mile span 1410 bridge issue

Unanswered Question
Feb 24th, 2007

I need to span 8 miles using the 1410 Bridge with integrated antenna. I configured the bridges in a lab and confirmed that they "talk". Taking them out to the span, the units didn't connect. So, I saved the configurations and placed the bridges in "install" mode. They connect! As soon as I reconfigure them they stop talking (either, one item at a time cfg or saved cfg file).

Site survey reported no interference and the path is Clear LOS. A 5.8GHz link was working on this span before (replacing with Cisco).

The only item I haven't checked was the distance configuration on the root bridge from 0 to 13KM.

Any ideas?

Thanks,

Kim

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode