02-25-2007 02:40 PM - edited 03-13-2019 03:57 PM
is it possible to have an IP phone automatically call a fixed number after a user lifts the phone, something similar to a hotline feature?
02-25-2007 07:28 PM
This is also known as a PLAR (private line automatic ringdown). The easiest way to accomplish this is to do the following:
1) Create a partition called PLAR_To_Destination
2) Create a blank translation with the called party transform mask to be the destination you want. Place the translation in the partition you just created above. Assign the appropriate calling search space to the translation so it can call the number you want.
3) Create a calling search space that contains the partition you created above.
4) Assign the calling search space to the line you want to enable as your PLAR.
Let us know how it goes.
Lelio
Please remember to rate posts if they help.
02-26-2007 05:19 AM
Hi Mohamed,
Just to add a note to Lelio's good info, here is a good config guide that shows the step by step to setting Hotdial up;
Hotdial on IP Phones with CallManager Configuration Example
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: