02-25-2007 07:17 PM - edited 03-14-2019 08:12 PM
Hi
I have 4 Cisco 7960 Phones with SIP Firmware. Can anyone please give me some instructions to replace the SIP firmware to SCCP? I would like to use these phones with Call Manager Express. I tried factory restore but no luck.
Thanks
AD
02-25-2007 08:07 PM
Take a look at the following link.
http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml
Hope this helps. If so, please rate the post.
Brandon
02-25-2007 10:34 PM
Applied to CME, the procedure consists in:
1) copy files from zipfile to router, you can use a directory if supported by the platform.
2) for each file, configure tftp-server, with alias as needed.
3) configure ephones with the corresponding mac address and type.
4) configure load under telephony-service for each phone type.
5) connect the phones to network.
Debug tftp events is the main troubleshooting tool for the above.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: