Solved: ICMP and NAT/PAT - Cisco Community

1485

Views

5

Helpful

1

Replies

how does PAT/NAT perform on ICMP packets if there are not ports like udp/tcp ?

best regards

francesco

1 Accepted Solution

Accepted Solutions

Have a look at these documents

http://tools.ietf.org/wg/behave/draft-ietf-behave-nat-icmp/draft-ietf-behave-nat-icmp-01-from-00.wdiff.html

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093f96.shtml

Both would help you understand

HTH

Hoogen

Do rate if this helps :)

View solution in original post

1 Reply 1

Have a look at these documents

http://tools.ietf.org/wg/behave/draft-ietf-behave-nat-icmp/draft-ietf-behave-nat-icmp-01-from-00.wdiff.html

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093f96.shtml

Both would help you understand

HTH

Hoogen

Do rate if this helps :)

Learn, share, save

Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.

New here? Get started with these tips. How to use Community New member guide

Log in to Community