no track rtr command anymore

Answered Question
Feb 26th, 2007

I want to make use of ip sla, but the "track 100 rtr 1 ..." command fails

example:

ip sla 1

icmp-echo 10.1.1.1 source-interface FastEthernet0

timeout 10000

threshold 2

frequency 15

ip sla schedule 1 life forever start-time now

ip sla 2....

track 100 rtr 1 reachability

^

track 200 rtr 2 reachability

^

it places the dreaded carrot on the rtr keyword.

I am running ip-base 12.4.11 t1 on a 3745.

Do I have to move up to advanced ip or enterprise for this feature.

I want to be able to use tracking ip sla for ip next-hop verify-availability 10.1.1.1 10 track 100

I have this problem too.
0 votes
Correct Answer by Ahmede about 9 years 7 months ago

This command is not supported in IP-Base nor Advanced IP, you will have to upgarde to a higher feature set..

Enterprise base will do..

12.4(11)T1 c3745-entbasek9-mz.12.4-11.T1

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Ahmede Mon, 02/26/2007 - 08:13

This command is not supported in IP-Base nor Advanced IP, you will have to upgarde to a higher feature set..

Enterprise base will do..

12.4(11)T1 c3745-entbasek9-mz.12.4-11.T1

ericgarnel Mon, 02/26/2007 - 09:10

If the non crypto images will work, I am home free. Otherwise, I will have to get some more flash

Actions

This Discussion