configuring Vlan on cisco 2900xl switch

nacertified · ‎02-26-2007

hello

i m applying vlan on my cisco 2900xl switch

i want 2 make the range (port no 8 to port no 16) a part of my vlan 10.

what is the range command to make this range of ports to be the part of vlan 10.

mikegrous · ‎02-26-2007

int range fa0/8 - 16

switchport access vlan 10

nacertified · ‎02-26-2007

hello

thanx for the command.i try it but it doesn't accept it.the ios version of cisco 2900xl switch is "Version 12.0(5.2)XU"

any further suggestions--?

ahmednaas · ‎02-26-2007

the 2500xl-3500xl software doesn't support the range command.

glen.grant · ‎02-26-2007

you will have manually input that command on each interface .

jegrimm · ‎02-26-2007

You can try cut/paste the config (sh run) into a notepad window, then modify the settings on a few and cut/paste the changes for the rest of the interfaces.

Once you are done with the config, cut/paste into the configur mode.

Cheers,

Jim