RSVP not connected

Unanswered Question
Feb 26th, 2007

I am setting up the first agent for my RSVP configuration, and when doing a sh sccp i get this. Showing I failed to register with CCM. I am running CM5.1 using IOS c2800nm-spservicesk9-mz.124-11.T1.bin on a 2811 gateway.I have a MTP on CM called "MTPEast2". Any ideas why it fails to register?

Thanks Dan

East-2811-1#sh sccp

SCCP Admin State: UP

Gateway IP Address: 10.1.130.2, Port Number: 2000

IP Precedence: 5

User Masked Codec list: None

Call Manager: 10.1.130.11, Port Number: 2000

Priority: N/A, Version: 5.0.1, Identifier: 1

Call Manager: 10.1.130.10, Port Number: 2000

Priority: N/A, Version: 5.0.1, Identifier: 2

Call Manager: 10.1.140.10, Port Number: 2000

Priority: N/A, Version: 5.0.1, Identifier: 3

Software MTP Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED

Active Call Manager: 10.1.130.11, Port Number: 2000

TCP Link Status: NOT_CONNECTED, Profile Identifier: 20

Reported Max Streams: 200, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 30

Supported Codec: pass-thru, Maximum Packetization Period: N/A

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30

Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period

: 30

RSVP : ENABLED

Attachment: 
I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)
getdan Fri, 03/02/2007 - 13:30

The auto-config command does not work in the 2811 router.

Actions

Login or Register to take actions

This Discussion

Posted February 26, 2007 at 11:11 AM
Stats:
Replies:3 Avg. Rating:
Views:252 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard