02-26-2007 01:37 PM - edited 02-21-2020 02:53 PM
I've a problen in a L2L ezVPN between a Server VPN 3825: ios 12.4-12 and a Client VPN 877: 124-9.T1.bin, in network extension mode.
On the server is specified the reverse route injection.
The problem is: After 1 hour of idle with the tunnel ipsec always on, the static route of the client network disappear.
Can anyone help me?
02-27-2007 05:15 PM
Hi,
Use the static keyword after the reverse route command so thet the route is not removed once the tunnel is inactive.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tsec_r/sec_r1ht.htm#wp1236849
Regards,
Ajit Singh
03-01-2007 04:48 AM
When I try to put the static comman I receive this error message
crypto dynamic-map SDM_DYNMAP_1 1
set security-association idle-time 3600
set transform-set ESP-3DES-SHA
reverse-route
!
Conf t
(config)#crypto dynamic-map SDM_DYNMAP_1 1
(config-crypto-map)#reverse-route static
%Static keyword not applicable to dynamic maps, re-enter cmd
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide