02-27-2007 01:38 AM - edited 03-05-2019 02:35 PM
Hi
On a Cisco 4507 with Redundant Supervisor Engine IV. Can the Interfaces/GBIC on the standby Supervisor be used or can you only use interfaces on the current active supervisor. I cant find any documentation on this.
Regards
Kev
Solved! Go to Solution.
02-27-2007 03:09 AM
The first module on both Supervisor engine would be active. The second module on both Supervisor engines will not be accesible.
This document should help you http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a0080134f18.shtml#topic2
HTH
Hoogen
Do rate if i have helped :)
02-27-2007 03:09 AM
The first module on both Supervisor engine would be active. The second module on both Supervisor engines will not be accesible.
This document should help you http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a0080134f18.shtml#topic2
HTH
Hoogen
Do rate if i have helped :)
02-27-2007 03:12 AM
Cheers for that its just what I was looking for
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide