cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
307
Views
0
Helpful
2
Replies

Cisco loadbalance switch

nayyares1
Level 1
Level 1

Hello All,

We are using Linux loadbalancers in our data center to manage failover, high availability between servers, now we are thinking to replace linux load balacing with cisco loadbalance switch, i need the recommendation of switch, while i wounder whether cisco loadbalance switch works same as linux loadbalancers?

thanks

2 Replies 2

Amit Singh
Cisco Employee
Cisco Employee

Hello,

What kinf of switches you are unsing in your Datacenter.If you are using Cat6500's then you can use Cisco CSM module on the chassis to do the server load-balancing on more than that.

http://www.cisco.com/en/US/products/ps6077/index.html

If you are not using 6500 you can go for Cisco 11000 series server load-balancers. You can get a fixed config model and a modular chassis in the series

http://www.cisco.com/en/US/products/hw/contnetw/ps792/index.html

HTH,

-amit singh

Hi,

Thanks for reply, btw, is it possible to loadbalance traffic using 4900 series catalyst. As somebody told me that all layer 4-7 switches are capable of doing it, thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco