02-27-2007 06:34 AM - edited 03-03-2019 03:56 PM
Hello. I want to configure two adsl lines on a router with 2 adsl interfaces and 2 fast ethernet interfaces.I wanna route traffic from f0/0 to adsl1 and from f0/1 to adsl2. How can i achieve that and still have full communication and internet access for all hosts? The two ethernet interfaces will be in different subnets.
Thanks in advance.
P.S. I cannot give anymore info cause i still dont know the project details.I will be glad for any help you can offer and i will give more info as soon as i get them.
Solved! Go to Solution.
02-27-2007 10:11 AM
You can use Policy based routing to achieve the same:
HTH,
-amit singh
02-27-2007 07:54 AM
You can use route-map in the config of f0/0 and f0/1 to set one next hop for each.
Regards
02-27-2007 11:46 PM
Got any guidelines on route map configuration???
02-27-2007 10:11 AM
You can use Policy based routing to achieve the same:
HTH,
-amit singh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: