02-27-2007 08:54 AM
I need recommendation on how to send configuration changes to (125) 1811 routers at remote end, aside from logging into each router and updating it manually. I appreciate any suggestions.
Thank you,
02-27-2007 01:43 PM
If you don't have Ciscoworks LMS, then go with "cosi-ciscotool" found here (along with some other great open source tools):
http://cosi-nms.sourceforge.net/alpha-progs.html
HTH
Steve
02-28-2007 07:21 AM
If you have an snmp utility you could use it to copy configs to your devices (provided they have basic snmp config):
http://www.cisco.com/en/US/customer/tech/tk648/tk362/technologies_tech_note09186a0080094aa6.shtml
Also, if you have CiscoWorks, you will need basic config to be able to push other config changes
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide