02-27-2007 12:36 PM - edited 03-05-2019 02:36 PM
02-27-2007 04:32 PM
Layer 2 only.
04-16-2013 02:11 PM
Layer 2 switch. Although it may be L3 functions (ACL,QoS,IPSG, etc.) , it's NOT LAYER 3 switch.
Because it does not have IP Routing Capability.
04-16-2013 02:38 PM
Cisco introduced Layer 3 switching on the 2960S, 2960G, 2960, and 2975 series switches when running the LAN BASE IOS with version 12.2(55)SE.
But there’s a small catch…it does NOT support RIP, OSPF, EIGRP, BGP, or routed interfaces. It ONLY supports 16 static routes with SVIs.
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_55_se/configuration/guide/swipstatrout.html
Hope this helps
Sent from Cisco Technical Support iPhone App
04-20-2013 07:10 AM
Great. Thanks Bilal.
05-04-2015 08:41 PM
Cisco 2960 is a layer 2 switch, to know more about it at Router-Switch.com.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: