NAC Framework with 802.1x authentication

jphelan3415 · ‎02-27-2007

I am having trouble getting support and information on NAC framework. According to the cisco web NAC framework is in Phase 2 and is useable. According to Cisco representitives it is not supported yet. I have ACS 4.1, CTA 2.0, Symantec 10.1.4, and CSA 4.5. I can get NAC to work Layer 2, 802.1x to authenticate, but I cannot get both to work at the same time. Also, I have found no support for Symantec being checked even after I loaded the posture plugin, adf, etc. Is it time to give up on NAC framework? Thanks.

vmoopeung · ‎03-05-2007

Following link may help you

http://www.cisco.com/en/US/netsol/ns617/networking_solutions_documentation_roadmap09186a008066499c.html

jphelan3415 · ‎03-05-2007

I appreciate the link, but I have been through it.

Here is a better question--has anyone been able to check the following using only ACS 4.0/4.1, Cisco dot1x capable switch, CTA 2.0, and Symantec AV:

Dot1x authentication

Symantec AV product levels (version 10)

Windows OS service packs/hot fixes

CTA levels

CSA levels

lmilher_2 · ‎03-19-2007

My friend, i have a customer with whis configuration and worki fine.

symantec need antivirus version 10 (8 or 9 no !!!!), the symantec posture plug installed in the clients.

work fine wiht w2k and xp

cta 2.x work fine. 1.x only work with L3 ip, no 802.1x.

csa i don?t have experience.

take care, it is hard to configure, if you need something more ask me to.

Leo.