02-27-2007 09:30 PM - edited 03-05-2019 02:36 PM
I have got the 6506 with the two sup720 in slot 5 and 6.Whenever i remove the active sup720 from the slot 5, the switch gets booted up then the standby comes on line which takes lot of time, do i need to do any spesicif configuration to make the standby switchover as soon the active sup goes down. please help me in these, if any configuration is required, please let me know the commant.
02-27-2007 09:57 PM
can anyone help me on this please, i am waithing for your response.
02-27-2007 11:52 PM
Hi
Attached are two links on supervisor redundancy on the 6500 switches -
IOS
http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper0900aecd801c5cd7.shtml
Hybrid
http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a0080088874.shtml
If you have dual sups, as long as you meet the criteria for redundancy which is covered in the above papers you shouldn't have to do anything special to get basic failover between your sups.
HTH
Jon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: