Cisco 877W and 802.11b

Unanswered Question
Feb 28th, 2007

Hi,

i'm trying out an 887w router but can't for the life of me figure out how to get the wireless running 802.11b. Before you ask why its so i can get PDAs connected.

thanks in advance

Charlie

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
rob.huffman Wed, 02/28/2007 - 06:46

Hi Charlie,,

I am not really familiar with the 877w but have you enabled any 802.11b Data Rates (1.0, 2.0, 5.5, and 11.0)?

Enter 1.0, 2.0, 5.5, and 11.0 to set these data rates to enabled on the 802.11b, 2.4-GHz radio.

From this good doc;

Capacity Coverage & Deployment Considerations for IEEE 802.11g

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_white_paper09186a00801d61a3.shtml

Hope this helps!

Rob

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode