cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
853
Views
0
Helpful
2
Replies

WS-X4448-GB-SFP

carla.decker
Level 1
Level 1

Are the ports on these line cards configurable for the speed? I need to attach network printers that only have 10/100 TX cards in them and I'm trying to figure out what's the best way to handle this? Configure the port (assuming that's an option)and put a cheaper media converter on OR put a $300+ Gb media converter on. Thanks in advance!

Carla Decker

2 Replies 2

bjw
Level 4
Level 4

The WS-X4448-GB-SFP operates in 1000Gb Full duplex only. you will need to use a converter or different line card.

Amit Singh
Cisco Employee
Cisco Employee

Carls,

Generally the ports on these modules are not configurable and it depends on the SFP transceiver modules that you are using. However using GLC-T 1000base copper SFP modules you can configure the speed to 10,100,100 or auto. Please have a look at the link below for more info.

http://www.cisco.com/en/US/products/hw/modules/ps4999/products_tech_note09186a00807a30d6.shtml#config1

HTH,Please rate if it does.

-amit singh

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: