No Windows patches for Unity?

Answered Question
Feb 28th, 2007

I have found Windows 2000 patches that need to be installed prior to installing the DST patch for CallManager but I can not find any W2K patches for Unity that need to be installed prior to the Unity DST patch. Am I missing something? Both Callmanager & Unity are on W2K.

TIA

I have this problem too.
0 votes
Correct Answer by rob.huffman about 9 years 7 months ago

Hi Gary,

All patches necessary (including Windows Patches) for Cisco Unity have been bundled into a single downloadable file available on CCO.

You will need to perform the applicable OS changes/CCM/Unity changes as indicated. Have a look at the following;

For CCM Readme;

http://ftp-sj.cisco.com/cisco/crypto/3DES/voice/callmgr/4.1/ciscocm.4-1-3-2007-DST-Update.1-0-1-readme.htm

For Unity Field Notice;

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_field_notice09186a00807dcf40.shtml

Hope this helps!

Rob

Correct Answer by Brandon Buffin about 9 years 7 months ago

The W2K patch is necessary for Unity and is included in the Unity_DST_Patches.zip file located here:

http://www.cisco.com/cgi-bin/tablebuild.pl/unity?psrtdcat20e2

Take a look at the following link regarding Unity and DST.

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_field_notice09186a00807dcf40.shtml

Hope this helps. If so, please rate the post.

Brandon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Brandon Buffin Wed, 02/28/2007 - 11:18

The W2K patch is necessary for Unity and is included in the Unity_DST_Patches.zip file located here:

http://www.cisco.com/cgi-bin/tablebuild.pl/unity?psrtdcat20e2

Take a look at the following link regarding Unity and DST.

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_field_notice09186a00807dcf40.shtml

Hope this helps. If so, please rate the post.

Brandon

Correct Answer
rob.huffman Wed, 02/28/2007 - 11:21

Hi Gary,

All patches necessary (including Windows Patches) for Cisco Unity have been bundled into a single downloadable file available on CCO.

You will need to perform the applicable OS changes/CCM/Unity changes as indicated. Have a look at the following;

For CCM Readme;

http://ftp-sj.cisco.com/cisco/crypto/3DES/voice/callmgr/4.1/ciscocm.4-1-3-2007-DST-Update.1-0-1-readme.htm

For Unity Field Notice;

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_field_notice09186a00807dcf40.shtml

Hope this helps!

Rob

Actions

This Discussion