CallManger, Unity, W2k, DST and TZEdit.exe

Answered Question
Feb 28th, 2007

I have CallManger 4.0 and Unity 4.0 both on W2k servers. I'm sure the answer is another conversation somewhere, but buried so here it is again.

Since the boxes are w2k can I just use the TZEdit tool from Microsoft to adjust the DST dates without any additional patching or negative concequences?

I have this problem too.
0 votes
Correct Answer by Brandon Buffin about 9 years 7 months ago

Although it might work, I would recommend following the Cisco guidelines for updating these boxes for the sake of stability and TAC support.

Unity and DST

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_field_notice09186a00807dcf40.shtml

Callmanager and DST

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_field_notice09186a00807e02b1.shtml

Hope this helps. If so, please rate the post.

Brandon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
Correct Answer
Brandon Buffin Wed, 02/28/2007 - 11:35

Although it might work, I would recommend following the Cisco guidelines for updating these boxes for the sake of stability and TAC support.

Unity and DST

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_field_notice09186a00807dcf40.shtml

Callmanager and DST

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_field_notice09186a00807e02b1.shtml

Hope this helps. If so, please rate the post.

Brandon

Actions

This Discussion