I have a route filter that I'm trying to implement. The idea is for local calls, to allow 10 digit dialing as long as the area code is 206 or 425. The user can also use 7-digit dialing as well.
I've configured the route filter as (AREA-CODE == 206) or (AREA-CODE == 425), and applied this to the route pattern 9.1[2-9]XX[2-9]XXXXXX in the "LocalNumbers" partition. However, it seems to ignore the filter and the user can dial say 914087681234
I've tried using DNA to troubleshoot, and it does show it hitting that pattern in the correct partition but unfortunately I don't see the route filter information showing up.
Have I missed something here, or what's the best place to look? CCM 4.1(3)sr4b
Route Filters only apply to patterns with the NANP @ in them. Here is the CCM 4.1(3) blurb on it.
Route filters, along with route patterns/hunt pilots, use dialed-digit strings to determine how a call is handled. Route filters only apply when you configure a pattern that contains the at (@) wildcard. When the route pattern/hunt pilot contains the @ wildcard, Cisco CallManager routes calls according to the numbering plan that is specified in the Numbering Plan drop-down list box. The route filter window that Cisco CallManager displays varies according to the numbering plan that you select.
Route filters allow you to determine which route patterns/hunt pilots your users can dial; for example, whether your users can manually choose a long-distance carrier (by dialing 101 plus a carrier access code).
Please rate any helpful posts