mac filtering configuration

Unanswered Question
Mar 1st, 2007

We need to configure a mac filter on a bunch of the cisco 2950 switches to allow only certain devices in. Short of manually doing it, has anybody done this in a more efficient way?

thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
abhishek_nandavat Thu, 03/01/2007 - 23:42

Hi,

What I understand is that you want only specified devices to be on your network, isnt it?

Well, what you can do is define a mac address based access control list and then apply a vlan-map to block or pass the traffic from those mac addresses.

Have a look at the following link for more -->

http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_example09186a0080470c39.shtml

The following URL might help as well -->

http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_guide_chapter09186a008007fa38.html#1020942

Hope this helps...

Regards,

AbhisheK

Please rate helpful posts!!!

Actions

This Discussion