I got a hopefully easy to solve problem.
I got a PIX 501 which is directly connected to an ADSL Modem.
It gets the IP from the provider and I am able to ping official ip addresses in the internet.
THe pix should build a vpn tunnel to a cisco 3005 concentrator.
So I created a group, username and filters for network access.
I testet it with a static ip and it works.
But when I configure the pix for dynamic IP it does not build the vpn tunnel.
On the concentrator I get the following message:
10830 03/01/2007 21:54:51.070 SEV=4 IKEDBG/65 RPT=35066 84.60.xxx.xxx
IKE AM Responder FSM error history (struct &0x3b44ac0)
What can be the problem ?
Attached the pix config.
(the permit ip any is only for testing)
Thank you all