Traffic-shape on Virtual-template

Unanswered Question
Mar 2nd, 2007

Try this configuration:

####################

aaa authentication ppp default local

bba-group pppoe 64k

virtual-template 2

interface FastEthernet0/0.50

description test unlim

encapsulation dot1Q 50

no snmp trap link-status

pppoe enable group 64k

interface Virtual-Template2

ip address 192.168.1.1 255.255.255.0

peer default ip address pool test

traffic-shape rate 64000 8000 8000 1000

ppp authentication pap

ip local pool test 192.168.1.2 192.168.1.5

####################

Traffic don`t shaping.

If I use rate-limit (not traffic_shape)- work ok.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion