c3750 unable to boot up after flash upgrade

Unanswered Question
Mar 2nd, 2007

Hi,

Appreciate help on the following boot up error:

Boot Sector Filesystem (bs) installed, fsid: 3

done.

Loading "flash:c3750-ipbasek9-mz.122-25.SEE2.bin"...flash:c3750-ipbasek9-mz.122-

25.SEE2.bin: no such file or directory

Error loading "flash:c3750-ipbasek9-mz.122-25.SEE2.bin"

Interrupt within 5 seconds to abort boot process.

Boot process failed...

The system is unable to boot automatically. The BOOT

environment variable needs to be set to a bootable

image.

switch:

Could someone advise me the steps or send me the relevant links?

do I need to do a xmodem since the flash:c3750-ipbasek9-mz.122-25.SEE2.bin is not found?

Thanks

Christina

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3.5 (2 ratings)
Loading.
glen.grant Fri, 03/02/2007 - 07:38

If you do a "dir flash: " does it show any images ? If so then add a boot statement to match image in flash . "boot system flash: .

hoogen_82 Fri, 03/02/2007 - 07:53

Before going for the xmodem option do a dir flash: just as what Grant has suggested. See if you have any bootable images present in your flash. If it is present then do a boot flash:

It should boot up. But if you have no images in your flash, then follow this link for xmodem recovery. http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml

HTH

Hoogen

Actions

This Discussion