how to configure l2tp over ipsec vpn between pix525 7.2(1) vpn server and windowsxp professional self vpn dial software(outside).which expert cao provide successful sample configuration.help me ,thanks!
This document describes how to configure Layer 2 Tunneling Protocol (L2TP) over IPsec from remote Microsoft Windows 2000/2003 and XP clients to a PIX Security Appliance corporate office using pre-shared keys with Microsoft Windows 2003 Internet Authentication Service (IAS) RADIUS Server for user authentication. Refer to Microsoft - Checklist: Configuring IAS for dial-up and VPN access for further information on IAS.
I have configured LT2P over IPSEC vpn on an ASA 5520, works great as long as I use a IP pool on the ASA. I've been unable to get DHCP to work through the firewall, it works fine with same config if I use the Cisco client. Any ideas?
I used ethereal capture windowsxp sending package,then I found XP sending 5 isakmp policies.the lifetime are all 28800 seconds.but your document mentioned the lifetime is 86400.why?please explanation as soon as possible.
21710-l2tpoveripsec.cap
Learn, share, save
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
