03-03-2007 11:31 PM - edited 02-21-2020 01:26 AM
hi,
one end i am using a vpn concentrator 3000 followed by a router and then isp.on the other end i want to establish vpn connection to this network using a router. how should i configure the router and concentrator?
kindly help as soon as possible ...
03-04-2007 04:57 AM
Hi,
Please take a look at the following document :
http://cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009482e.shtml
*Please rate if this helped.
-Kanishka
03-04-2007 07:59 PM
thank you for your help.
But i have got a router in front of the concentrator .how do i do it?
03-05-2007 02:47 AM
Hi,
The configuration on the Router and concentrator would still remain the same.
If you have a router in front of the concentrator, that means you shud have a NAT (static) entry defined for concetrator Public Intf ip address.
The remote router will use that Public ip address of the conctrato create the tunnel. Also, on the local Router, please make sure you have following ports opened :
UDP 500
UDP 4500
ESP
Hope this answers your questions.
*Please rate if helped.
-Kanishka
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: