ssh on pix using puty client

Unanswered Question
Mar 4th, 2007

i cant access my pix using ssh. i have configured the following. There is no access-list on the inside interface

INSIDE IP - 192.168.1.1/24

domain-name xxx.com

hostname Company

ca generate rsa key 2048

ca save all

ssh 192.168.1.0 255.255.255.0 inside

telnet and ping are ok.

thanks a lot.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
kaachary Sun, 03/04/2007 - 05:22

Hi,

Try this :

ca zeroize rsa

ca gen rsa key 1024

ca save all

If you are using putty as SSH client, make sure, the SSH version 1 and 2 both are selected.

*Please rate if helped.

-Kanishka

scottmac Sun, 03/04/2007 - 11:11

Which version of PIX OS are you using?

Some of the older versions do not support SSH, others (up to 6.35 I think) only support SSH version 1.

Good Luck

Scott

kaachary Mon, 03/05/2007 - 00:56

Hi,

Are you able to telnet to port 22 from Command line ?

Does it open up a blank window ?

If yes, then ther's someting wrong with the SSH client you are using. Make sure putty is setup correctly. Also, did you verify that SSH 1 and 2 both are selected on it.

-Kanishka

peteruwa Thu, 05/17/2007 - 00:49

You have mised out

"aaa authentication ssh console LOCAL" in your configuration. Add it and try connecting again.

Thanks

pet

Actions

This Discussion